rear disc brake caliper bracket bolt size? !

This forum is for the discussion of general Isuzu related information

Moderator: Staff

rear disc brake caliper bracket bolt size? !

Postby Sh_YVR » Thu Oct 29, 2020 7:06 pm

00RODEO4wd 3.2

Does anyone know the part no(s) of the 17mm caliper bolt that holds the caliper bracket ?!

(after a brake job, one came off ; luckily noticed before it grinded the rim too much.
Sh_YVR
Has a Trail Truck
 
Posts: 336
Joined: Sat Sep 27, 2003 9:05 pm
Location: Portland
Has thanked: 2 times
Have thanks: 4 times

Sponsor
 

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Fri Oct 30, 2020 3:28 am

Sh_YVR wrote:00RODEO4wd 3.2

Does anyone know the part no(s) of the 17mm caliper bolt that holds the caliper bracket ?!

8-97351-108-0 $2.64 USD
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times

Re: rear disc brake caliper bracket bolt size? !

Postby Sh_YVR » Fri Oct 30, 2020 3:46 am

thanks buster...
any suggestions on an e-store ? kinda hard to figure out who actually keeps it.. I'm close to MN.grandforks..
I also may try the HONDA dealer here..
Sh_YVR
Has a Trail Truck
 
Posts: 336
Joined: Sat Sep 27, 2003 9:05 pm
Location: Portland
Has thanked: 2 times
Have thanks: 4 times

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Fri Oct 30, 2020 4:43 am

Sh_YVR wrote:thanks buster...
any suggestions on an e-store ? kinda hard to figure out who actually keeps it.. I'm close to MN.grandforks..
I also may try the HONDA dealer here..

The caliper bolt was used from 1994 to 2002 with Honda and Acura so a local dealer may have one in stock.
The parts stores and amazon sell caliper hardware kits that include these bolts and the pins, the trick is to find the correct ones for your truck. It is 12mm x 27mm and I think the pitch is 1.25mm
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8

For this post the author Buster28 was thanked by:
Sh_YVR
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times

Re: rear disc brake caliper bracket bolt size? !

Postby Sh_YVR » Sun Nov 01, 2020 2:24 am

Do you/anyone know what the torque should be ?

(btw - it has held true for years now... I would say 1/4-1/3 of the time I get service they create a new problem - it must be nightmare servicing a late model vehicle)
Sh_YVR
Has a Trail Truck
 
Posts: 336
Joined: Sat Sep 27, 2003 9:05 pm
Location: Portland
Has thanked: 2 times
Have thanks: 4 times

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Sun Nov 01, 2020 7:05 am

Caliper Bracket Bolt torque
You do not have the required permissions to view the files attached to this post.
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times

Re: rear disc brake caliper bracket bolt size? !

Postby Sh_YVR » Sun Nov 01, 2020 7:29 am

thanks - that tells me the guy wasn't even close...(helped redo it/was using a standard socket wrench)
Sh_YVR
Has a Trail Truck
 
Posts: 336
Joined: Sat Sep 27, 2003 9:05 pm
Location: Portland
Has thanked: 2 times
Have thanks: 4 times

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Sun Nov 01, 2020 7:34 am

Sh_YVR wrote:thanks - that tells me the guy wasn't even close...(helped redo it/was using a standard socket wrench)


This may wrong, I just found another image with a different spec. Will sort it out and get back to you.
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Sun Nov 01, 2020 7:49 am

This is a rear 4WD 2000 Rodeo/Amigo caliper. The previously posted spec came from the same FSM and was for the front caliper. Makes no sense because the bolts are the same.
You do not have the required permissions to view the files attached to this post.
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times

Re: rear disc brake caliper bracket bolt size? !

Postby Sh_YVR » Sun Nov 01, 2020 8:10 am

well I think he prob put it at 50-80 so way off... (based on watching) I'm sure of it was 100 never would have happened.
Sh_YVR
Has a Trail Truck
 
Posts: 336
Joined: Sat Sep 27, 2003 9:05 pm
Location: Portland
Has thanked: 2 times
Have thanks: 4 times

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Sun Nov 01, 2020 9:03 am

I have used a 4ft piece of pipe on a breaker bar to get them loose so the bolts are industrial strength quality.
They don't need to be very tight, just a little blue thread locker to keep them tight.
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Sun Nov 01, 2020 11:25 am

Btw. are you aware that the two caliper slide pins/bolts are not the same. The top one is the Guide bolt and the bottom one is the Lock bolt.
The Guide Bolt has two flats and the head has the letter G stamped on it.
The Lock Bolt is round.
Torque: 44 N·m (32 lb ft)
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times

Re: rear disc brake caliper bracket bolt size? !

Postby Sh_YVR » Sun Nov 08, 2020 12:12 am

is there anything special about the washer ?( on the bracket) ... I found new bolts but they don't have the washer - presuming the original one also fell out.
Sh_YVR
Has a Trail Truck
 
Posts: 336
Joined: Sat Sep 27, 2003 9:05 pm
Location: Portland
Has thanked: 2 times
Have thanks: 4 times

Re: rear disc brake caliper bracket bolt size? !

Postby Buster28 » Mon Nov 09, 2020 6:02 am

Any 12mm flat washer that has the same thickness (more or less) should work, use the washer on the other bolt as a guide.
2002 Rodeo Sport 4X4 3.2L V6
2020 Jeep Wrangler 2dr 4x4 3.6L V6
2000 Cadillac ETC 4.6L V8
1991 Cadillac Allante 4.5L V8
User avatar
Buster28
4L30E Guru
 
Posts: 11063
Joined: Fri Dec 18, 2009 12:28 pm
Location: RI
Has thanked: 9 times
Have thanks: 1248 times


Who is online

Users browsing this forum: Google [Bot] and 6 guests