amigo 2.6 engine photo

Discuss anything related to drivetrain mods here (Engine &Transmission Swaps, lift, gearing, exhaust, etc)

Moderator: Staff

amigo 2.6 engine photo

Postby cyal » Tue May 19, 2020 7:11 am

Hello
somebody have photo of the engine of amigo 2.6 to see to coil?
thanks
cyal
Drives in Mud
 
Posts: 94
Joined: Wed Jul 05, 2006 2:48 pm
Has thanked: 0 time
Have thanks: 0 time

Sponsor
 

Re: amigo 2.6 engine photo

Postby DSUZU » Tue May 19, 2020 6:38 pm

The coil mounts directly to the top rear of the valve cover (see the ugly red and yellow arrow I made. Note that the valve cover is only grounded by a ground strap that attaches to the firewall and plugs to the rear of the valve cover. If you don't have this strap, you may have to make a ground wire. Dennis
Jan 2018 repairs 007 COIL MOUNTING.JPG



EDIT: so the ugly arrow i tried to make in paint didn't come out :evil:. The coil can be seen just above the throttle body and between the two hoses
You do not have the required permissions to view the files attached to this post.
1991 LS Trooper 2.8 V6 5 speed conversion (Sold)
1989 LS Spacecab 2.6 5 speed 4x4 manual hubs, Rodeo torsion bars, extended shackles, 2" lift, K&N air filter (drop in), dump bed conversion, burgundy interior change, warn brush bar. Engine is bored .020 oversize and upgraded to 1994 pistons, head and EFI system.
Previously owned: 1987 Trooper II LS, 1989 Trooper (parts only), 1994 Trooper 3.2 Auto, 1997 Rodeo 2.6 5 speed, 1993 shortbed pickup 2.3 (project - sold) 1992 Rodeo 4x4 LS (parts car, devoured by Spacecab needs) plus some 70 plus other non Isuzu vehicles over the years. 1994 Amigo devoured to provide head and EFI system.
Heavily damaged by engine compartment fire while driving on March 24th 2018, condemned by insurance company and taken on March 30th 2018 :cry:.

https://forum.planetisuzoo.com/viewtopic.php?f=15&t=64060
City of St Petersburg (Fl) Fleet Maintenance 8/23/83 - 12/4/2018 (Retired). Started new job 6/4/2019. Was retired, now just tired.

If your wife has 5.00, and you have 20.00, your wife has...25.00

"Water is one of the greatest essentials of life. Without water, you can't make coffee."

Forget the "free education". Why waste time. Just give me the "FREE INCOME".
DSUZU
I am the Stig
 
Posts: 8771
Joined: Fri Mar 16, 2012 8:28 pm
Location: St Pete Florida
Has thanked: 275 times
Have thanks: 869 times

Re: amigo 2.6 engine photo

Postby itsmehb » Tue May 19, 2020 10:31 pm

Another view. Like Dennis said, coil sits on top of the rear of the valve cover. I prefer the 2.3 coil location for mine and am looking for a 2.3 coil bracket. On the 2.6 there's no room for the coil because of the itec manifold. On my 2.6 with the 2.3 intake and carb there is room. My reason for wanting to move it, a cleaner looking engine compt. and maybe won't have to remove it to adjust the valves. Double click the pics for a bigger view.
You do not have the required permissions to view the files attached to this post.
1990 Amigo, 2.3 5 speed (sold)
1991 Pick up (long gone)
2000 Amigo, 2.2 5 speed(sold)
1985 Trooper 1.9 4 speed (sent back to KS)
1989 Trooper RS 2.6 5 spd. Red

We get too soon old and too late smart!

"A true soldier fights not because he hates what is in front of him, but because he loves what is behind him"

Golf is just an expensive way to play marbles
User avatar
itsmehb
I am the Stig
 
Posts: 3825
Joined: Fri Jan 14, 2011 9:39 am
Location: Flower Mound Tx.
Has thanked: 140 times
Have thanks: 285 times

Re: amigo 2.6 engine photo

Postby DSUZU » Wed May 20, 2020 6:02 am

Harry, I don't remember a bracket. IIRC, the coil bolts directly to the vertical ears on the rear of the manifold - but it's been a while. Dennis
1991 LS Trooper 2.8 V6 5 speed conversion (Sold)
1989 LS Spacecab 2.6 5 speed 4x4 manual hubs, Rodeo torsion bars, extended shackles, 2" lift, K&N air filter (drop in), dump bed conversion, burgundy interior change, warn brush bar. Engine is bored .020 oversize and upgraded to 1994 pistons, head and EFI system.
Previously owned: 1987 Trooper II LS, 1989 Trooper (parts only), 1994 Trooper 3.2 Auto, 1997 Rodeo 2.6 5 speed, 1993 shortbed pickup 2.3 (project - sold) 1992 Rodeo 4x4 LS (parts car, devoured by Spacecab needs) plus some 70 plus other non Isuzu vehicles over the years. 1994 Amigo devoured to provide head and EFI system.
Heavily damaged by engine compartment fire while driving on March 24th 2018, condemned by insurance company and taken on March 30th 2018 :cry:.

https://forum.planetisuzoo.com/viewtopic.php?f=15&t=64060
City of St Petersburg (Fl) Fleet Maintenance 8/23/83 - 12/4/2018 (Retired). Started new job 6/4/2019. Was retired, now just tired.

If your wife has 5.00, and you have 20.00, your wife has...25.00

"Water is one of the greatest essentials of life. Without water, you can't make coffee."

Forget the "free education". Why waste time. Just give me the "FREE INCOME".
DSUZU
I am the Stig
 
Posts: 8771
Joined: Fri Mar 16, 2012 8:28 pm
Location: St Pete Florida
Has thanked: 275 times
Have thanks: 869 times

Re: amigo 2.6 engine photo

Postby itsmehb » Wed May 20, 2020 7:29 am

DSUZU wrote:Harry, I don't remember a bracket. IIRC, the coil bolts directly to the vertical ears on the rear of the manifold - but it's been a while. Dennis


Dennis, I just assumed there was a bracket. I'll have to take a closer look later today. I think the coils on the 2 are the same, but that's another assumption.
1990 Amigo, 2.3 5 speed (sold)
1991 Pick up (long gone)
2000 Amigo, 2.2 5 speed(sold)
1985 Trooper 1.9 4 speed (sent back to KS)
1989 Trooper RS 2.6 5 spd. Red

We get too soon old and too late smart!

"A true soldier fights not because he hates what is in front of him, but because he loves what is behind him"

Golf is just an expensive way to play marbles
User avatar
itsmehb
I am the Stig
 
Posts: 3825
Joined: Fri Jan 14, 2011 9:39 am
Location: Flower Mound Tx.
Has thanked: 140 times
Have thanks: 285 times

Re: amigo 2.6 engine photo

Postby cyal » Wed May 20, 2020 1:57 pm

thanks for the photos
cyal
Drives in Mud
 
Posts: 94
Joined: Wed Jul 05, 2006 2:48 pm
Has thanked: 0 time
Have thanks: 0 time


Return to Drivetrain Mods

Who is online

Users browsing this forum: No registered users and 4 guests