Isuzu SUV Forum banner

Is a 2" Lift Possible on 2nd-Gen Trooper w/ ARB Bull Bar?

4K views 4 replies 4 participants last post by  One_Big_Game 
#1 ·
I am aiming to lift my 95 Trooper w/ 2919 OME springs in the rear. I was wondering, can turning the front torsion bars allow for enough front-end lift to match the rear 2" when there's the added weight of bull bars and winch on the front nose? I'd hate to lift the rear 2" then only get 1" out of the front. I simply don't know how much lift the torsion bars will give me in the front. Has anyone else done this? I'd love anyone's thoughts or experience. Thanks!
 
#3 ·
The ride height in front can be adjusted indefinitely by reindexing the torsion bars as necessary. I prefer not to go more than 3" to preserve ride quality, so 2" is not a problem. Check your alignment for camber after the lift; a ball joint "flip" might be helpful for camber but I'm not sure it will be needed for a 2" lift.
 
#5 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top