Trooper parts

[Shawn Anthony]

Hello,
I operate the largest and most capable isuzu repair shop & Isuzu parts recycling center right here in Reno Nevada.

I have many remanufactured components such as:
ECM, Stereo, TOD modules, engines, transmission & axles in stock.

Primary I stock Isuzu Trooper and Rodeos. I have complete running & non running Troopers available with clean tiles for anyone interested in a entire vechicle. I can fully restore you a vechicle or modify one for the trails.

I manufacture custom bumpers, skid plates, rock sliders, roof racks & anything else you can dream up.

I have customers from 4 different states that bring me thier vechicles & I ship parts all over North America

How can I help keep your Isuzu on the road & trail?

[Tentin]

That's good to know there's a relatively local resource out there in case something catastrophic happens

[lorenzo816]

This guy is legit.
Just saying

[DSUZU]

Kind of a john west. Dennis

[JoeIsuzu]

I'm curious, what do you do when your Trooper needs a heater core? We have maybe one source for new ones (if still available), but they're over $300. Salvaged ones are getting scarce. I sold a few for $30-$35 each a few years back, but the current asking price looks to be $300. Have you had to replace any yet? If you have used ones, what are you getting for them?

Jack

[Shawn Anthony]

90% of the time i can repair leaking heater cores.

i am currently working on a retrofit system for replacing 1st gen heater cores and control valve. i expect to have a kit available before fall of 2021

[JoeIsuzu]

90% of the time i can repair leaking heater cores.

i am currently working on a retrofit system for replacing 1st gen heater cores and control valve. i expect to have a kit available before fall of 2021

Personally, I'm not big on repairing a leaking plastic core. But the replacement kit sounds interesting. Do you have an idea of price yet?

Jack

[Shawn Anthony]

The aim is 200 to 400

[riggler]

Do you have a website that we can cruise ?

[Shawn Anthony]

Do you have a website that we can cruise ?

I currently do not have a website. I sell parts directly to my customers. What is it you are looking for?

[troopersteve]

Hello, do you have a contact phone number? I am needing some parts for my 1997 Trooper. It is an auto trans trooper and I have a diesel 3.1 engine and 5spd trans I am putting in it. I will be needing clutch peddle, interior parts and more stuff.
Thanks for any information.

[Shawn Anthony]

Hello, do you have a contact phone number? I am needing some parts for my 1997 Trooper. It is an auto trans trooper and I have a diesel 3.1 engine and 5spd trans I am putting in it. I will be needing clutch peddle, interior parts and more stuff.
Thanks for any information.

I gave you my number in a PM

[tclavel]

Can I have a phone number? I'm working on restoring a 1990 Trooper.

[Shawn Anthony]

Can I have a phone number? I'm working on restoring a 1990 Trooper.

775-772-6473 i am located in Reno Nevada. please keep in mind time zone differences.

[Theo]

I have a "91 amigo with 2.6. Do you have, or know of any rebuild kits or remanufactured throttle bodies? Thanks, Theo

[Shawn Anthony]

I have a "91 amigo with 2.6. Do you have, or know of any rebuild kits or remanufactured throttle bodies? Thanks, Theo

I have re-manufactued throttle bodies instock.
They are 180.00

[Theo]

Thanks, its a 91amigo with manual transmission. I can do pay pal if you want. Happy new year, Theo

[Shawn Anthony]

Thanks, its a 91amigo with manual transmission. I can do pay pal if you want. Happy new year, Theo

I will PM you ordering information tonight

happy new year

[Shawn Anthony]

I have a 1990 & a 1993 Trooper that is newly added to my inventory.
the 1994 is a automatic & running with no issues and has front end damage.
the 1990 is a manual & total POS but runs and drives well.

what parts do you guys need form these?

[apassander]

I have a small list of 2001 Trooper parts needed soon, Im also in the U.S(CT) and if possible email me at [email protected] I would like to go to you for parts. Thanks!!

[nattybynature]

Do you have a website that we can cruise ?

I currently do not have a website. I sell parts directly to my customers. What is it you are looking for?

Currently on a work trip in Hawaii. I will be blowing what I make here on mods when I return to Maine. I will most def be looking for manual locking hubs, fender flares (custom would be dope but factory could do) and an off road bumper; Can you give me a quote for these?


Also you really need a website or at the very least a thread with a price list for commonly requested items that you can update. Maybe the mods will sticky it in the classy ads.

[Shawn Anthony]

Do you have a website that we can cruise ?

I currently do not have a website. I sell parts directly to my customers. What is it you are looking for?

Currently on a work trip in Hawaii. I will be blowing what I make here on mods when I return to Maine. I will most def be looking for manual locking hubs, fender flares (custom would be dope but factory could do) and an off road bumper; Can you give me a quote for these?


Also you really need a website or at the very least a thread with a price list for commonly requested items that you can update. Maybe the mods will sticky it in the classy ads.

I make bumpers from steel and aluminum. my flagship bumper is made from 19mm & 10mm aluminum & weighs 47lbs. It features air tanks, light mounts, skid plate, recessed lights, hi-lift grabs, tow bits and hidden winch mount.... its absolutely stunning. im still trying to figure out how to upload photos & when i do ill will snap a example. Custom bumpers start at 1,000 and top out at near $4,000 it all depends on what you want. I can build you anything you can dream up including fender flairs too. i can not supply a exact number because I do not know what you want as far as materials and design. To get to that point we would need to have a few phone calls, photo examples &/or a drawing to work off of.

[mudoilngears]

Post up some photos, you have some photos in your first post in this thread. The process is the same to add photos to a new post.

[Shawn Anthony]

9 times out of 10 pictures don't load. I'm still trying to figure out why

[itsmehb]

Well Shawn, Have to say that looks like a good one. Well designed. I imagine the finish would be the buyers choice.