Notes from Intake Manifold Gasket Replacment on 2001 Rodeo

Here are all of the best threads. Alert an admin to nominate a thread

Moderator: Staff

Re: Notes from Intake Manifold Gasket Replacment on 2001 Rod

Postby Hari Seldon » Tue Oct 13, 2015 9:28 am

Same here... CEL light only flashes when I give it gas in "Drive"... but does not flash when I give it gas in "Park"... strange.
Hari Seldon
Drives on Pavement
 
Posts: 6
Joined: Wed Sep 30, 2015 10:35 am
Has thanked: 0 time
Have thanks: 1 time

Sponsor
 

Re: Notes from Intake Manifold Gasket Replacment on 2001 Rod

Postby radare » Fri Jan 01, 2016 3:04 pm

Fixed the images. Moved to another new hosting site which shouldn't go away too soon.
'94 Isuzu Rodeo 4WD, 3.2L V6. 156k miles (Sold); '01 Isuzu Rodeo LS 4WD, 3.2L V6, 108k miles (Sold).
Currently restoring an '01 Rodeo Sport V6
My other passion: My Yamaha XJ600 and XJ600 Scrambler
User avatar
radare
Trail Master
 
Posts: 598
Joined: Wed Dec 01, 2004 2:59 pm
Location: Denver, CO
Has thanked: 25 times
Have thanks: 53 times

Re: Notes from Intake Manifold Gasket Replacment on 2001 Rod

Postby radare » Mon Jan 11, 2016 2:22 am

Took this photo today, while replacing the IMG on my '01 Rodeo Sport. It shows how I access the passenger-side bolt for the fuel-line bracket. I reach behind the heater hoses with my left hand and then operate a ratchet with a standard 10mm socket, with my right hand. The left hand holds the socket on the bolt while the right hand turns it. Its a tight fit and might not work if you have really big triceps.

Image
'94 Isuzu Rodeo 4WD, 3.2L V6. 156k miles (Sold); '01 Isuzu Rodeo LS 4WD, 3.2L V6, 108k miles (Sold).
Currently restoring an '01 Rodeo Sport V6
My other passion: My Yamaha XJ600 and XJ600 Scrambler
User avatar
radare
Trail Master
 
Posts: 598
Joined: Wed Dec 01, 2004 2:59 pm
Location: Denver, CO
Has thanked: 25 times
Have thanks: 53 times

Re: Notes from Intake Manifold Gasket Replacment on 2001 Rod

Postby cool breeze » Fri Mar 25, 2016 1:20 pm

Im in the process of finishing a head gasket job and stuck on this. Never have i ever wanted to burn down a vehicle so much!
cool breeze
Drives on Pavement
 
Posts: 8
Joined: Wed Feb 24, 2016 5:54 pm
Has thanked: 0 time
Have thanks: 0 time

Re: Notes from Intake Manifold Gasket Replacment on 2001 Rod

Postby lucamax » Thu May 21, 2020 9:41 pm

I have just done the job because a cooling liquid leak , a legacy of previous owner.

gkrellShoot_04-05-2020_115407.jpg


The leak was on the thermostat bypass hoses, the previous owner thought ot was the thermostat gasket and put a lot of sealant paste on the thermostat pipre.

gkrellShoot_04-05-2020_115407.jpg


Sadly the original thoroidal gasket of the heater metal hoses do not exist anymore the Isuzu replacement part is a standard culindrical O-ring
gkrellShoot_04-05-2020_115407.jpg


Part numbers : 9095612250 , 9095612200

Thanks to radare for this 3D, very helpful

The most difficult is to unmount the EGR nut and mount again fuel hose.
The trick is to lift the plenum a couple of centimeters to have more space.

I was quite surprized by the 2,5 kg/meter torque for the 8 plenum bolts, that is really a lot.

gkrellShoot_04-05-2020_115407.jpg
lucamax
Drives on Pavement
 
Posts: 22
Joined: Sun May 10, 2020 1:45 am
Has thanked: 1 time
Have thanks: 0 time

Previous

Who is online

Users browsing this forum: No registered users and 1 guest

cron