Isuzu SUV Forum banner
1 - 20 of 57 Posts

·
Registered
Joined
·
738 Posts
Discussion Starter · #1 ·
Hello,
I operate the largest and most capable isuzu repair shop & Isuzu parts recycling center right here in Reno Nevada.

I have many remanufactured components such as:
ECM, Stereo, TOD modules, engines, transmission & axles in stock.

Primary I stock Isuzu Trooper and Rodeos. I have complete running & non running Troopers available with clean tiles for anyone interested in a entire vechicle. I can fully restore you a vechicle or modify one for the trails.

I manufacture custom bumpers, skid plates, rock sliders, roof racks & anything else you can dream up.

I have customers from 4 different states that bring me thier vechicles & I ship parts all over North America

How can I help keep your Isuzu on the road & trail?
 

Attachments

·
Registered
Joined
·
738 Posts
Discussion Starter · #6 ·
90% of the time i can repair leaking heater cores.

i am currently working on a retrofit system for replacing 1st gen heater cores and control valve. i expect to have a kit available before fall of 2021
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #12 ·
troopersteve said:
Hello, do you have a contact phone number? I am needing some parts for my 1997 Trooper. It is an auto trans trooper and I have a diesel 3.1 engine and 5spd trans I am putting in it. I will be needing clutch peddle, interior parts and more stuff.
Thanks for any information.
I gave you my number in a PM
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #19 ·
I have a 1990 & a 1993 Trooper that is newly added to my inventory.
the 1994 is a automatic & running with no issues and has front end damage.
the 1990 is a manual & total POS but runs and drives well.

what parts do you guys need form these?
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #22 ·
nattybynature said:
Shawn Anthony said:
riggler said:
Do you have a website that we can cruise ?
I currently do not have a website. I sell parts directly to my customers. What is it you are looking for?
Currently on a work trip in Hawaii. I will be blowing what I make here on mods when I return to Maine. I will most def be looking for manual locking hubs, fender flares (custom would be dope but factory could do) and an off road bumper; Can you give me a quote for these?

Also you really need a website or at the very least a thread with a price list for commonly requested items that you can update. Maybe the mods will sticky it in the classy ads.
I make bumpers from steel and aluminum. my flagship bumper is made from 19mm & 10mm aluminum & weighs 47lbs. It features air tanks, light mounts, skid plate, recessed lights, hi-lift grabs, tow bits and hidden winch mount.... its absolutely stunning. im still trying to figure out how to upload photos & when i do ill will snap a example. Custom bumpers start at 1,000 and top out at near $4,000 it all depends on what you want. I can build you anything you can dream up including fender flairs too. i can not supply a exact number because I do not know what you want as far as materials and design. To get to that point we would need to have a few phone calls, photo examples &/or a drawing to work off of.
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #26 ·
itsmehb said:
Well Shawn, Have to say that looks like a good one. Well designed. I imagine the finish would be the buyers choice.
Finish, color, opitions, meterials etc.... It's all the buyers choice. Anything that the customer can dream up I can make.
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #30 ·
superswire said:
Guys, just a warning. This guy may have parts. But he doesn't know alot about isuzus. Ask someone who has been around a long time before paying for overpriced parts.
Extravagant claims form a complete stranger.
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #34 ·
aeronca said:
Shawn Anthony said:
90% of the time i can repair leaking heater cores.

i am currently working on a retrofit system for replacing 1st gen heater cores and control valve. i expect to have a kit available before fall of 2021
I just purchased a heater core on EBay for my 1995 Trooper Limited. price 63.00
That sounds like the correct price for a 2gen heater core. I normally see them for 45 to 100 depending on retailer. I'm a little confused about why you are informing me of this. Can you please fill me in here?
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #43 ·
Chakazulu said:
I just bought a 1999 trooper and Im pretty sure I want to keep it for a good while. what would a motor and auto 4x4 trans run? Also interested in swapping my seats to the cloth LS with armrests. Do you have any of those available? thank you for your time.
-Chris
A used 3.5L engine are normally $1000 to $1500 depending on millage. Before I sell these engines I perform a compression test and open them up to inspect the bearings, timing belt and seals. If they are out of factory specifications they are rejected and are not sol.... I don't sell junk.

A re-manufactured 3.5L engine with a 3 year/30,000 mile warranty are $3,400

I only sell a bullet proofed automatic transmissions. These upgraded transmissions include racing quality high flow pump, torque converters, valve body lager capacity pan, high temp bands. This is the only way they will be reliable in a heavy 4x4 vehicle. They come with a 3 year/30,000 mile warranty and cost $4,500.00. If you visit Napa auto parts or Jasper Transmissions you can buy a standard rebuilt transmission for about $2,000.

I currently do not have any seats worth selling. My inventory is in constant rotation so check back with me from time to time for seats.
 

·
Registered
Joined
·
738 Posts
Discussion Starter · #49 ·
jeffmyers said:
looking for a TOD wiring harness off the transfer case
Im out of stock on these harnesses. mail me your original harness and i can rebuild it to factory specifications or better than factory if you chose.
 
1 - 20 of 57 Posts
Top