Isuzu SUV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
10,185 Posts
The question is did the F/L BLOW, or did it fail because of a bad connection (corrosion)? If it blew, you'll obviously need to find out what blew it. From my experience, where F/Ls are usually a section of wire, a failed F/L usually has the insulation looking very puffy because of the heat that blew the link. Links are designed for more of a "slow blow" while fuses are a fast blow. You certainly could replace with fuses, but be sure to keep plenty of spare fuses as there are things (loads) that would blow a fuse, but not blow a F/L. Dennis
 

·
Registered
Joined
·
10,185 Posts
I will add the memory of this problem to future trouble shooting suggestions. Thanks for the detailed answer. Dennis
 
  • Like
Reactions: NCEvets
1 - 2 of 2 Posts
Top