Isuzu SUV Forum banner
1 - 20 of 59 Posts

·
Registered
Joined
·
470 Posts
Discussion Starter · #1 ·
YES, the ozarkduck truck. The name came from my handle I use on my Cb radio, which came from a mixture of the song convoy (my dad and I use to listen to it together when i was just a little kid), and where I live, the Ozark mountains. I have done a lot of stuff to my rig, but there is much more to come. I use to have a build thread, but it was in the wrong section and I barely ever updated it. So now I'm just gonna use this one.
So far, I have: lifted the front by torsion bar(the back comes next friday), ball joint flip, new mau5 transmission with only 100000 miles on it, removed restrictors in y-pipe, cut everything out of cat conv, removed front bumper valence, wig wag turn signal mod, cobra cb radio, led red underflow dash lights in the interior (I can make them solid or flash with the bass), added drivers side "oh ****" handle, all new gaskets on top end of engine, all new gaskets in exausht system, all new stereo equipment including two 10 kicker comps (the good ones not the cheap Walmart kind), one dual 12in sub, jl audio 6.5s in the front door, eclipse in the back, jl audio 300/4 and mosfett 400 amps, and jl audio tweeter system all around.
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #2 ·
I will eventually upload pictures, but right now my phone is being a POS and won't let me.
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #3 ·
Some pictures
 

Attachments

·
Registered
Joined
·
470 Posts
Discussion Starter · #4 ·
My lift kit. Going on next friday
 

Attachments

·
Registered
Joined
·
1,691 Posts
Like the sunroof,c.b.,nice first generation rodeo. Will look good with lift. Tony
 
  • Like
Reactions: comerz

·
Registered
Joined
·
156 Posts
I've talked to you on Instagram haha... Good to make the connection on here as well. Truck looks good. I'm still interested in what that lift ends up looking like and its' performance. Any reason you went wth that particular kit as opposed to, say, a shackle, or a a more traditional leaf you add to the bottom of the pack?
-J 8)
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #7 ·
Thanks guys. And yeah I own 4x4isuzu on Instagram. Lol. And well, I wanted the rear to be stiffer and I couldn't find the traditional add a leaf, supposedly auto zone discontinued them, and this was only $45!! I really hope it works. Kinda nervous about it...
 

·
Registered
Joined
·
790 Posts
Does it go in the bottom of your spring pack to curve the springs?
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #9 ·
Yes it does
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #10 ·
Some more pictures. Tad is the man. He helped me figure out how to fix the picture problem
 

Attachments

·
Registered
Joined
·
470 Posts
Discussion Starter · #11 ·
More pictures
 

Attachments

·
Registered
Joined
·
470 Posts
Discussion Starter · #12 ·
The lift goes on tomorrow
 

Attachments

·
Registered
Joined
·
156 Posts
Any updates? Get the lift on?
-J 8)
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #14 ·
Yeah buddy!!! 3.5 inches of difference
 

Attachments

·
Registered
Joined
·
470 Posts
Discussion Starter · #15 ·
Also bought a bigger shackle to put on there. I plan on putting those on there tomorrow. At some point in time I'll do a long a arm setup with calmani torsion bars, short bump stops, and balljoing spacers to get even more lift out of her. Then when I get money, SAS.
 

·
Registered
Joined
·
156 Posts
Gonna worry about a diff drop or just leave that alone till SAS?
-J 8)
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #17 ·
I might. When you do the diff drop, do you have to take the cross member that runs from a arm to a arm and lower it somehow?
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #18 ·
More shots of the lift
 

Attachments

·
Registered
Joined
·
470 Posts
Discussion Starter · #19 ·
Havent gotten to add the shackle yet. I gotta go find some bigger bolts for it and also get some metal to weld in between the shackles to keep it from swaying and bending lol.
 

·
Registered
Joined
·
470 Posts
Discussion Starter · #20 ·
New cb hooked up.
 

Attachments

1 - 20 of 59 Posts
Top