Isuzu SUV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,823 Posts
One word of advise make sure the convertor will bolt up to the flexplate before putting tranny in,even if it has same number of bolts.
I left the convertor bolts as the last thing to do(other than starter) and I found out that their is two bolt patterns off by 1/2 bolt hole....after a late frustrating talk with an awesome person(he calmed me down :mrgreen: ) I removed the tranny again and swapped convertors after flushing the best I could
 
1 - 1 of 1 Posts
Top