Isuzu SUV Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
57 Posts
Do you still need help reading codes? I can explain how to do it and how to read them if so.
 

· Registered
Joined
·
57 Posts
Ok. Under your center console you will find your computer. There will be one plug that is connected to nothing. It is a black plug. Looking at it there is two wires next to each other. Use a paper clip, piece of wire. Connect these two wires. Turn the ignition on, DO NOT start the truck. Just move to the ON postion. The check engine light will flash. The three will be 12 ( Flash *pause* flash flash)

Then it will flash the codes 3 times a piece. The last code if I remember right is a 55.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top