Isuzu SUV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter · #1 ·
It happened last fall when one one wasnt working in Heater area and now none of them are working.

How do i replace the bulbs in there, or better yet how do i take the heater controls out to change the bulbs and not break anything?
i need some input before i do this, and see if i can get replacement bulbs..

can't seem to find any info in the Haynes manual or in the search section
 

·
Registered
Joined
·
10 Posts
pull the knob ends off then the strip with the colors for hot and cold ie.red to blue peel off. then there are two tiny little bulbs in there,there may be a couple of screws to remove,its been a long time sinse ive had to replace mine ps. mine is a 89 pup they should be similar if not the same,hope this helps
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top