Isuzu SUV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
192 Posts
I had a lowered 88 Pup(very similar to the 94) but it was only lowered 3"

Pics:
http://f1.pg.photos.yahoo.com/ph/conman ... /my_photos

Since it was only lowered 3", I used lowering blocks in the rear and a t-bar drop in front. But since you want a 5" drop, you can drop it close to 5" but you will probably never be able to get the front end aligned as I had troubles getting it aligned at 3". There use to be a few companies that made lowered spindles which then you could lower to 5"+ and still get it aligned correctly but I don't know if they are available now.

Good Luck,
Con
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top