Isuzu SUV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11,467 Posts




3" lift with 32" bfg at's.

You didnt say which generation you were looking at. Gen1 and Gen 1.5 ('93-97) Had issues with the hydraulic valve adjusters ticking but thats about it. Common problems with 2nd gen ('98+) are a bit more. Some '98-99 had a bad run of heads that would cracks, some 2nd gens had issues with the intake manifold gaskets cracking, oil holes in the pistons would clog on some and burn oil, fuel pressure sending units went bad on some.
 
1 - 1 of 1 Posts
Top