Isuzu SUV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
My trooper was largely disassembled in the interior when I got it. I expect it was because the PO was trying to get to the heater core, which was broken. I replaced the Heater and the Evap, and the expansion valve and reassembled. But, I don't know what keeps the cable housings in place for the 3 cables. Does anyone have a picture or a diagram? Here you can see the white housings on their perches but nothing to secure them.
Hood Motor vehicle Automotive design Automotive lighting Bumper


Thanks guys
 

·
Registered
2000 Isuzu Trooper S 3.5l DOHC - Scheduled for heart surgery
Joined
·
23 Posts
.....But, I don't know what keeps the cable housings in place for the 3 cables. Does anyone have a picture or a diagram? Here you can see the white housings on their perches but nothing to secure them.
They're little metal spring/retention clips & the pinch onto the plastic.

Camera accessory Digital camera Camera lens Cameras & optics Point-and-shoot camera
Motor vehicle Automotive tire Automotive exterior Toy Bumper
Machine Auto part Automotive wheel system Gas Automotive exterior


Auto-parts stores have those racks of Dorman or Help! branded products that you may luck out finding these on. Or even hardware stores have a good assortment of these bits-&-bobs.

Hope this was helpful.
 
1 - 3 of 3 Posts
Top