[97HP4x4]

Probably already been touched on but I was curious to know how do I lift my 97 honda passport in the front evenly by tightening the torsion bars?

 

[grobrooks]

Righty Tighty, measure

 

[Ian1006]

Ya another 97 Honda Passport owner! Looks like we have the same plans, with the 265/75/16 tires and lift as well. There is a big huge bolt under neath the truck at the back of the tbars, just tighten it up.
PM Sent

 

[Adam Ventulett]

i have already cranked mine up 1st pb baster is your frend spay both ends and your adjusting bolt a few time before you start lift up truck and take the weight off your bars. you will turn to the right . take a marker and make a mark on your socket and on your torsion bar key one full turn =1/4 inch in hight make sure you check the hight you want with the weight on bars.