Isuzu SUV Forum banner

Driveline Thunk 2001 Rodeo Sport

25270 Views 31 Replies 13 Participants Last post by  Amigo-2k
After being told by the dealer that the thunk in the driveshaft is something that all the Rodeos do when starting and stopping, I decided to do something about it. I pulled off the drive shaft and cleaned the old crappy grease out the slip joint. Repacked the slip joint with new moly grease and put it all back together. The inital test drive showed no sign of the clunk, problem solved, took about an hour to do. I used CV joint metal clamps on the boot ends but I think a big nylon tie-wrap would work just fine.
HTH :D Randy
1 - 1 of 32 Posts
DONT GET TOO EXCITED FOR THE NOISE WILL RETURN NEXT TIME GO DOWN TO THE NAPA STORE AND PURCHASE RED CROWN IT IS A THICK GREASE TRY NOT TO GET THE NASTY STUFF ON YOU FOR IT IS DREADFUL TO WASH OFF THIS SHOULD LAST MUCH LONGER THAN CONVENTIONAL DRIVESHAFT LUBE AOR AXLE GREASE
1 - 1 of 32 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top