Isuzu SUV Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Here's my pig, she's a 3.0td intercooled.

So far here are the mods:
*remapped engine
*50mm body lift
*265/65/R18 BFG AT's
*Bullbars & spots

It's a work in progress. I'm hoping to add an ARB bumper and suspension lift.

 

·
Registered
Joined
·
8,605 Posts
Good looking truck! You guys get all the cool stuff!!
 

·
Registered
Joined
·
326 Posts
OMG when will Isuzu come back :oops: She's a beaut, keep the pics comin'!
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
Here's a pic before I installed the body lift. I had to do a bit of trimming around the arches in the front to squeeze this wheel/tyre combo in. Clearance in the back was fine but there was a serious amount of rubbing issues up front :roll:


Here she is after the body lift. I also wound the torsion bar up front. This was taken just after and appears a little uneven to the rear. It settled in a bit but I still hand to wind it down a little. Maybe I was a little over-enthusiastic!
 
1 - 4 of 4 Posts
Top