[Tim99Trooper]

MagnaFlow has recomended part # 14262. I asked for a low tone but not too loud. And, I still want the exhaust pipe out the back in original position. Has anyone used this MF muffler?

 

[Shawn Anthony]

My go to muffler is a 40 Series FlowMaster.

 

[Enemigo]

I bought this: https://www.amazon.com/gp/product/B000COWUDY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

And it sounds like this (I don't have a better video yet):

It's gotten a little louder over time. When you engine break down a decent it burbles and pops a little and I like that. Pay close attention to the dimensions though, as this is a much smaller muffler than factory and is 2.5". This is a bit louder than stock, louder than I wanted for hunting, but I don't mind it at all on the street or while wheeling. Even though the inlet/outlet are offset, you can see right through this muffler.

 

[turnerd]

I bought this: https://www.amazon.com/gp/product/B000COWUDY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

And it sounds like this (I don't have a better video yet):

It's gotten a little louder over time. When you engine break down a decent it burbles and pops a little and I like that. Pay close attention to the dimensions though, as this is a much smaller muffler than factory and is 2.5". This is a bit louder than stock, louder than I wanted for hunting, but I don't mind it at all on the street or while wheeling. Even though the inlet/outlet are offset, you can see right through this muffler.

That sounds really nice in the video. How's the noise on the highway?

 

[Enemigo]

Hmmm, good question. I hear it, but it doesn't bother me. That's probably pretty subjective though. I also don't have a stereo and have more wind noise than I would like coming in from the driver side window, so it's not exactly a quiet ride in the first place.

 

[Karlvon]

I put a thrush 400 on my v6 amigo
Nice sould not to loud. Has a vintage sports car sound as i am shifting up through the gears at speed.

 

[cmf5]

This probably isn't super helpful for your application, but I put a super basic (and cheap—under $40) Flowmaster 42443-FM "FlowMonster" 2.25 in/out dual chamber on my '89 with the 2.6. I'm happy with the results, no highway drone, but nice around town gurgle. Definitely makes it sound like it has more than 110hp, lol. Plus it fixed my rusted-out OE one . Here's a video of right after my Jerry cam install:

http://imgur.com/7Q8TpZ4

 

[turnerd]

This probably isn't super helpful for your application, but I put a super basic (and cheap—under $40) Flowmaster 42443-FM "FlowMonster" 2.25 in/out dual chamber on my '89 with the 2.6. I'm happy with the results, no highway drone, but nice around town gurgle. Definitely makes it sound like it has more than 110hp, lol. Plus it fixed my rusted-out OE one . Here's a video of right after my Jerry cam install:

http://imgur.com/7Q8TpZ4

I like the sound -- once I turbo my 4ZE1 I'll need a new exhaust, so that muffler will certainly be in the running

 

[Enemigo]

Yeah that sounds nice from here.

 

[Tim99Trooper]

I bought this: Amazon.com

And it sounds like this (I don't have a better video yet):

It's gotten a little louder over time. When you engine break down a decent it burbles and pops a little and I like that. Pay close attention to the dimensions though, as this is a much smaller muffler than factory and is 2.5". This is a bit louder than stock, louder than I wanted for hunting, but I don't mind it at all on the street or while wheeling. Even though the inlet/outlet are offset, you can see right through this muffler.

Thanks, MagnaFlow is suggesting part # 14262. Is the Stock Trooper exhaust piping 2.25 or 2.50"?

 

[Tim99Trooper]

My go to muffler is a 40 Series FlowMaster.

Thanks. I had a MagnaFlow on my 5.3 Silverdo and loved it, so I'm sticking with MF,

 

[Enemigo]

Thanks, MagnaFlow is suggesting part # 14262. Is the Stock Trooper exhaust piping 2.25 or 2.50"?

Stock was 2.25" I believe.