Isuzu SUV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
677 Posts
There was a write up posted here a couple of years ago on swapping seats from a different model into an Amigo. I searched but could not find it. As I remember, the guy who did it made a simple adapter that bolted to the existing seat mounts and the new seats bolted to that. I think that all he did was cut some angle iron to bolt to the floor, then attached the seats to that.

Anything is doable if you have the tools, the know how, and the time.

Rodeos and Amigo's are almost the same trucks. So seats from a Rodeo should bolt directly to the Amigo mounts. If not it should be really easy to fab a new mount. Even with my limited abilities I could do it knowing that I once mounted a pair of Rambler reclining buckets into a 63 Chevy Impala.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top