Isuzu SUV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
7,538 Posts
just the brake light is on? id check the switch on the e brake handle. see if the tab on the ebrake arm is touching the pin switch when fully released. the other thing to check is the cables, make sure its not buckling and preventing the ebrake handle from FULLY releasing and hitting the switch for the light.
Ron
 

·
Registered
Joined
·
7,538 Posts
Naldo87GA said:
is that all the way in the back? so after releasing the Pbrake arm it should hit a pin to turn off the light?
follow the ebrake handle back, you will see the switch, its the only thing with wires going to it. if the little tab on the handle that SLIDES, doesnt push the pin all the way down (disconnecting the GROUND to turn off the light), the light will stay on. see if the cable isnt going down smooth and might be holding the handle up just alittle to prevent it from turning off the light
 
1 - 2 of 2 Posts
Top