Isuzu SUV Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
82 Posts
Take a look at this diag.
Put a good size socket or a breaker on the bolt of pulley/tensioner #3 (in pic). I think it is 14mm. You're going to want to have the wrench handle like it is in the pic; in the 2 o'clock position. Turn clockwise, but you're not actually tightening the nut as much as releasing the tension on the arm as you force it down. You'll see whay I'm talking about when you get in there.

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top