Isuzu SUV Forum banner
1 - 20 of 42 Posts

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #1 ·
hey everyone,
getting a 4x4 3.1L V6 3.1L 5 speed short bed this weekend with frame rot.
no gate, no alloys, no hubs.
80k original miles, parting or sell whole for the right price.

 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #3 ·
bench seat and stock speedo only instrument cluster...sorry...v6 cluster is only for the V6...i have a 4 cylinder tach cluster if thats what you need. i can see if i have an spacecab center console (short one) or possibly a tall Amigo type. what did you need besides that?? anything let me know....
thanks
Ron
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #5 ·
Bullitt930 said:
Guess those wheels are 15", right?
correct, but the alloys are not for sale as the person that found this truck for me is taking them and the gate. its part of the deal i made with him. i need the hubs for spares for my truck and the rest....well..............i have to see how the front frame section is before i decide what to do with the rest. unless i get the right amount of parts requests and/or sale price, i MIGHT make a flat bed loooooooooong wheelbase truck for winter time and my snowmobiles. :twisted:
 

·
Registered
Joined
·
2,442 Posts
I'm thinking of beginning to stockpile parts to swap to a manual in the new Troop... Any chace this will fit in my '96? The trans that is lol. If so, what all other parts would be able to be used for my truck?
 

·
Registered
Joined
·
101 Posts
lowzone said:
Bullitt930 said:
Guess those wheels are 15", right?
correct, but the alloys are not for sale as the person that found this truck for me is taking them and the gate. its part of the deal i made with him. i need the hubs for spares for my truck and the rest....well..............i have to see how the front frame section is before i decide what to do with the rest. unless i get the right amount of parts requests and/or sale price, i MIGHT make a flat bed loooooooooong wheelbase truck for winter time and my snowmobiles. :twisted:
Ah yeah, I see that now. Should have looked harder the 1st time I guess. Thats fine though, I want 16s anyway.
 

·
Registered
Joined
·
4,646 Posts
i spy a spacecab in the back ground. me gusta. :eek: :shock: :D
 

·
Registered
Joined
·
169 Posts
Hey Ron,
the 4 cylinder tach cluster would be cool. I've got a '92 amigo,2.3? I think the tall Amigo type would probably work...! Is it the one with the EB in it?
W/O being too much of a pain is there any possibility of pics of those items???
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #10 ·
95Rodeo4x4 said:
i spy a spacecab in the back ground. me gusta. :eek: :shock: :D
yes thats my friends SC, hes the one that found the truck. You should see his welding skills. hes fabricating a standard cab with a supra rear suspension and the body modifications are amazing. i get the truck tomorrow or tuesday now...

ebgbz....what do you mean "EB" in it? i have to see if i still have it, and i know the grey plastic showed some wear and UV damage. the cluster, no problem on pics on that. you WILL need to run a Oil pressure sensor and wiring to the cluster, and a wire from the coil to the tach slot on the plug. i have all the pins for the harness, to make it a rather easy install. i might even have the oil pressure sending unit here..ill work on it but give me a couple days. if you dont hear from me, email me directly as i need it to reply with pics anyway
thanks
Ron

[email protected]
 

·
Registered
Joined
·
397 Posts
Does the truck have AC? I'm interested in doing AC install on my 92.
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #12 ·
i will find out, i know its a base model since it has the crappy 2 spoke steering wheel and 225/75/15s (the alloys were added later and no big tire package) so AC was an option then.
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #13 ·
its here, its UGLY....OMG its ugly.

frame is GONE!!! i mean, i dont know how it drove here and didnt snap in 1/2

interior is dirty but there. stupid parts available,complete key lock set, turn signal switch, dash parts, radio cover is hacked up, v6 cluster NO TACH, nice clean bench seat with built in arm rest (not shipping), taillights (black bezel GOOD shape), front corner lights in nice shape (no stress cracks), grille fits 88-92 "D" style, nice shape (shipping not cost effective), headlights, interior door parts (shells damaged), trim, no tailgate, 2 snowflakes left. ehhhhhhhhhh....misc. screws and bolts and shifter boots...not much to salvage but i needed the rear axle for my truck and spare hubs :)

shoot me an email or PM and ill see what i can slavage....

Thanks
Ron

[email protected]
 

·
Registered
Joined
·
3,998 Posts
Ron,

I sent you a PM about the trans... Trying to look at options other than retrofitting a 2.6 or Diesel trans.

Let me know.. Thanks!

B
 

·
Registered
Joined
·
7,284 Posts
Mediamonkey11 said:
I'm thinking of beginning to stockpile parts to swap to a manual in the new Troop... Any chace this will fit in my '96? The trans that is lol. If so, what all other parts would be able to be used for my truck?
BUMP for Tony's question.
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #17 ·
the trans wont fit, this is the GM 3.1L . NO AC :( either.
 

·
Registered
Joined
·
2,150 Posts
lowzone said:
DASZU said:
how hard would it be to swap the radio/ac tower into my amigo?
whatcha mean???
I want the rodeo style radio slot, I hate the low slung Amigo radio holder, I can't find any adapters and holding my radio in with duct tape is getting old.
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #20 ·
DASZU said:
lowzone said:
DASZU said:
how hard would it be to swap the radio/ac tower into my amigo?
whatcha mean???
I want the rodeo style radio slot, I hate the low slung Amigo radio holder, I can't find any adapters and holding my radio in with duct tape is getting old.
this is the same style as yours 88-95. the Radio is down low behind the shifter :( are you looking for the radio brackets that bolt to the dash frame? i should have those. they bolt to your radio then bolt to the dash frame. the radio is well secured that way...no duct tape :)
 
1 - 20 of 42 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top