Isuzu SUV Forum banner

88'+ Front Axle Bracket to Frame Bushing Replacement

692 views 4 replies 2 participants last post by  gruff54 
#1 ·
Hi. This mod got some attention on FB so I figured I'd post it here. Credit to the job goes to Rob Fuge who gave me permission to post up his writeup.

He uses poly bushing cut down to replace the stock rubber. PDF will be attached.

I have not performed this myself though others confirm it's functionality. See the PDF. Hope this helps somebody.
 
#4 ·
Gruff,

The original poster did the job on his second gen though it should apply to almost all of the front end axle brackets. I think they are the same.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top