Isuzu SUV Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #1 ·
have a set of used mud flaps for the big tire package truck. the rear mounts are missing the support (rusted off) but the main base mount is good, has some surface rust but intact and SOLID. fronts are just flaps with a brace that follows the fender shape for support. also in very good shape. rear flaps say ISUZU on them. fronts are blank. will post pics later tonight

$35/set shipped. (please consider ~$15 of it is shipping)

thanks
Ron
 

·
Registered
Joined
·
4,646 Posts
will they fit on a rodeo?
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #3 ·
the front will bolt right on....the rear, not so much. the brace COULD be removed and then bolt the flap right onto the 1/4 panel, like the front one is....i dont have a rodeo here to test fit it. not sure. the rear bracket would be useless so i could save you on the shipping if needed. just send the flaps and the front support (lays flat), and be less weight as well, not that the whole thing weighs much anyway.....but not shipping the brackets would help.....
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #4 ·
you MIGHT have to drill holes in the rear flap and 1/4 panel lip to fit it.....i dont honestly know whats involved.
 

·
Registered
Joined
·
4,646 Posts
Because I have no idea how to get them on without the brace I will pass these up. Hopefully I can find a set :D
 

·
Registered
Joined
·
7,543 Posts
Discussion Starter · #6 ·
no problem. id keep them for my spacecab but the 33x10.5s might rub on the fronts. its CLOSE. :) its just parts im pulling off the parts 4x4 and dont need. thanks for not leaving me hanging.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top