3.2 litre V6 overhaul.

1867 Views 2 Replies 3 Participants Last post by Red, Sep 5, 2017

bhunt261

Discussion Starter · Jun 25, 2003

Can anyone out there provide me with information on overhauling the 3.2 litre SOHC engine. Mine has 180k and is in need of revival. Open for all suggestions. Please reply to [email protected]. Thanks.....

Save

1 - 3 of 3 Posts

Turbinewrench

· #2 · Aug 4, 2003

Hi,

I'm new to the board, but I've had good luck with Haynes Repair Manuals.
I replaced my first head gasket on my 88 Trooper (4 cyc.) using this manual. That was all the information I had and it worked out well for me.

If nothing else they will give you a good foundation to start.

Good Luck :!:

Save

Reactions: 1

Red

· #3 · Sep 5, 2017

Turbinewrench said:
Hi,

I'm new to the board,
but I've had good luck with Haynes Repair Manuals .

I replaced my first head gasket on my 88 Trooper
( 4 cylinders . ) using this manual .

That was all the information I had and it worked out well for me.

If nothing else they will give you a good foundation to start .

Good Luck

:!:

Or you could refer to these YouTube links ~ and replace the bad parts with good parts . . .

[BBvideo 560,340:3m2pmdj0]https://www.youtube.com/watch?v=MOlVNbsAjX4[/BBvideo]

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month