1999 amigo

504 Views 11 Replies 5 Participants Last post by saxon, 3 mo ago

saxon

Discussion Starter · 3 mo ago

ok about 4 years ago it developed a OS leak on the small line going to the rack
tried all kids of "fix's" none worked ordered a replacement part from i forgot were and they sent the wrong line.
didn't want to wait another week so went to junk yard and got a line off a rodeo, well it's leaking again.......

any one have a better fix? or just source another part?

also when warm and coming to a stop the idle drops to around 700 rpm and it stalls starts right back up but on occasion it will stall when slowing and rpm drops.

4L30E auto

1 - 6 of 12 Posts

saxon

Discussion Starter · #4 · 3 mo ago (Edited)

turnerd said:
power steering leak? in the middle of the line or at the fittings?

have you checked the IAC valve out? might be sticking

at the fittings, and i should say the hard lines on the rack and pinion

and why would the IAC be causing than issue?

saxon

Discussion Starter · #6 · 3 mo ago

mudoilngears said:
Did

you make sure the orings were good?

the original developed a leek got one off a passport

Rectangle Font Handwriting Parallel Art

it worked for about 8 years , now its leaking again either part 115 or 88at the gear box side

See less See more

saxon

Discussion Starter · #8 · 3 mo ago

turnerd said:
could be sticking at the low idle position... they more often stick at far too high of an idle but I've had them get stuck both ways

3.2 V-6, no IAC

saxon

Discussion Starter · #10 · 3 mo ago

Buster28 said:
2000 and newer 3.2L V6 no IAC valve, a 1999 3.2L V6 has an IAC valve.

location? throttle body i asume?

saxon

Discussion Starter · #12 · 3 mo ago

Buster28 said:
#22 is the IAC

View attachment 128221

thank you sir

1 - 6 of 12 Posts