Isuzu SUV Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
ok about 4 years ago it developed a OS leak on the small line going to the rack
tried all kids of "fix's" none worked ordered a replacement part from i forgot were and they sent the wrong line.
didn't want to wait another week so went to junk yard and got a line off a rodeo, well it's leaking again.......

any one have a better fix? or just source another part?




also when warm and coming to a stop the idle drops to around 700 rpm and it stalls starts right back up but on occasion it will stall when slowing and rpm drops.

4L30E auto
 

· Registered
Joined
·
1,576 Posts
power steering leak? in the middle of the line or at the fittings?

have you checked the IAC valve out? might be sticking
 

· Super Moderator
98 Rodeo, 4JB1-TC
Joined
·
3,220 Posts
Did
at the fittings, and i should say the hard lines on the rack and pinion

and why would the IAC be causing than issue?
you make sure the orings were good?
 

· Registered
Joined
·
1,576 Posts
at the fittings, and i should say the hard lines on the rack and pinion

and why would the IAC be causing than issue?
could be sticking at the low idle position... they more often stick at far too high of an idle but I've had them get stuck both ways
 
1 - 12 of 12 Posts
Top