Isuzu SUV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. General Isuzu Discussion
    Hi all, Need to clean my 89 Amigo EGR tube. I'd prefer to not attempt to remove the pipe after reading all the horror stories about trying to remove it (stripping bolts, cracked pipe, etc) Is this the right idea: remove throttle body spray a bunch of deep creep down the egr port in the...
  2. General Isuzu Discussion
    Will the Itec 2.6 fuel injected manifold bolt on to a g180/200? Looks like it will, but the 2.6 manifold is missing a coolant passage port. Thoughts? Experience?
  3. General Isuzu Discussion
    Am wanting to install a universal/in-line fuel pump on my 1990 2.6 Trooper. I was looking at the brands Holley and Carter, but wanted to double-check that I need a pump that produces at least 12-16 psi(?) And, where is the "best" place to install it? Close to the tank or in the engine bay? I...
  4. Drivetrain Problems
    91 Trooper 2.6 manual. 257k miles, severe blowby, spun bearings. It needs a new engine. Junkyard websites say that newer 2.6s are incompatible. What's the differences between the 4ZE1 from different years/models and is there any reason why a newer one or one from a Rodeo/Amigo/pickup wouldn't...
  5. Drivetrain Problems
    My 1990 Trooper with a 2.6 is having fuel delivery issues. It has a new fuel filter, most of the fuel lines, etc. The fuses are also good. I'm guessing the relay is good also but I'm not positive on that (I have swapped it for another briefly but it didn't seem to help). Whenever I disconnect...
1-5 of 5 Results
Top