2.8L V6 ICM Location

Discuss anything related to drivetrain problems here (Engine, Transmission, etc)

Moderator: Staff

2.8L V6 ICM Location

Postby blairbo » Sun Jun 18, 2017 11:39 am

Hey guys trying to do some trouble shooting on my trooper. Can anyone link me a picture of where the ICM is actually located. I have a 1990 Trooper with the 2.8L V6.

Thanks
blairbo
Drives on Pavement
 
Posts: 7
Joined: Tue Jun 13, 2017 1:39 pm
Has thanked: 0 time
Have thanks: 0 time

Sponsor
 

Re: 2.8L V6 ICM Location

Postby DSUZU » Sun Jun 18, 2017 2:11 pm

center console. the tray is removable and ecm is under it. Dennis
1991 LS Trooper 2.8 V6 5 speed conversion (Sold)
1989 LS Spacecab 2.6 5 speed 4x4 manual hubs, Rodeo torsion bars, extended shackles, 2" lift, K&N airfilter (drop in), dump bed conversion, burgundy interior change, warn brush bar.
Previously owned: 1987 Trooper II LS, 1989 Trooper (parts only), 1994 Trooper 3.2 Auto, 1997 Rodeo 2.6 5 speed, 1993 shortbed pickup 2.3 (project - sold) 1992 Rodeo 4x4 LS (parts car, devoured by Spacecab needs) plus some 70 plus other non Isuzu vehicles over the years.

http://forum.planetisuzoo.com/viewtopic.php?f=15&t=64060

The American dream is getting farther and farther away from the American.

If your wife has 5.00, and you have 20.00, your wife has...25.00

"Water is one of the greatest essentials of life. Without water, you can't make coffee."
DSUZU
I am the Stig
 
Posts: 7043
Joined: Fri Mar 16, 2012 8:28 pm
Location: St Pete Florida
Has thanked: 220 times
Have thanks: 624 times

Re: 2.8L V6 ICM Location

Postby geoffinbc » Sun Jun 18, 2017 2:25 pm

The ICM is a little blacl box under the hood. The ECM is under the console.
1990 Trooper, 3.2L (3.1L .040 over) Pushrod V6, 5 speed manual. 33X10.50X15 BFG M/T KM2's. 3" OME Lift. Cowl Induction Intake. ARB Lockers front and rear. HD Tierods.
Off the road for an overhaul right now.

Big Bore Intake Kits & Greasable Shackles Here
User avatar
geoffinbc
I am the Stig
 
Posts: 6705
Joined: Sat Dec 01, 2007 2:44 am
Location: Chilliwack, BC, Canada
Has thanked: 8 times
Have thanks: 324 times

Re: 2.8L V6 ICM Location

Postby gwana66 » Sun Jun 18, 2017 2:50 pm

http://www.isoterra.com/isuzu/planetisuzoo/IMG_5927.jpg

See if that link works. The Ignition Control Module (ICM) on the 2.8 is the black object under the distributor rotor. Use ONLY AC Delco if it needs to be replaced. The others will fail.
98 Amigo, 2.2 5sp 4x4, 4.77 gears and factory LSD.
Power nothing - No power windows, no power locks, no power engine. ;)
Even the hubs are manual now.
2003 Grille and headlight swap

For this post the author gwana66 was thanked by:
paulevans76
gwana66
Zu Royalty
 
Posts: 1237
Joined: Thu Dec 18, 2014 1:04 pm
Location: Cape Coral, FL
Has thanked: 12 times
Have thanks: 205 times

Re: 2.8L V6 ICM Location

Postby DSUZU » Mon Jun 19, 2017 4:35 pm

:oops: My bad! ICM, ECM. Well at least I didn't tell him where to find the ICBM - He might be Korean. Dennis
1991 LS Trooper 2.8 V6 5 speed conversion (Sold)
1989 LS Spacecab 2.6 5 speed 4x4 manual hubs, Rodeo torsion bars, extended shackles, 2" lift, K&N airfilter (drop in), dump bed conversion, burgundy interior change, warn brush bar.
Previously owned: 1987 Trooper II LS, 1989 Trooper (parts only), 1994 Trooper 3.2 Auto, 1997 Rodeo 2.6 5 speed, 1993 shortbed pickup 2.3 (project - sold) 1992 Rodeo 4x4 LS (parts car, devoured by Spacecab needs) plus some 70 plus other non Isuzu vehicles over the years.

http://forum.planetisuzoo.com/viewtopic.php?f=15&t=64060

The American dream is getting farther and farther away from the American.

If your wife has 5.00, and you have 20.00, your wife has...25.00

"Water is one of the greatest essentials of life. Without water, you can't make coffee."
DSUZU
I am the Stig
 
Posts: 7043
Joined: Fri Mar 16, 2012 8:28 pm
Location: St Pete Florida
Has thanked: 220 times
Have thanks: 624 times

Re: 2.8L V6 ICM Location

Postby blairbo » Fri Jun 23, 2017 7:04 pm

Thanks everyone. that made my life much easier.
blairbo
Drives on Pavement
 
Posts: 7
Joined: Tue Jun 13, 2017 1:39 pm
Has thanked: 0 time
Have thanks: 0 time


Return to Drivetrain Problems

Who is online

Users browsing this forum: No registered users and 2 guests

cron